Error

Please insert at least 5 characters before searching.

You are in Mikron Tool website for USA | Change Region
News & Events
Private Area

Error!

Please check your user and password

user
password
/ /

News

2018

Celebrating – within the family
At the 20 years jubilee the employee’s families were the focus point
20 May 2018

On the 1st of April 2018 Mikron Tool looked back on its 20 years success story. And celebrated with all its employees on the 28th of the same month. Because it’s them which made success possible, day by day with constant top-level commitment.

+
Sponsors wanted!
For the 20 years jubilee, a cycle tour for a good cause, you too can help us!
25 April 2018

On May 31, 12 “crazy” Mikron Tool employees on their bicycles start in Rottweil to arrive after 4 days in Agno. The occasion is the 20 years company anniversary. However, more is involved: with the help of Kilometer-Sponsors an amount as high as possible will be collected for Greenhope. Obviously Mikron Tool participates with donations for each cycled Kilometer.

+
20 years and still a bit crazy
On April 1st, Mikron Tool looks back on 20 years of success
01 April 2018

Embedded within the Mikron Group – known above all as builder of Transfer- and Automation systems – Mikron Tool, has created for itself, since its inception 20 years ago, a solid position in the world of precision cutting tools. Today the cutting tool manufacturer in Ticino (southern Switzerland) is one of the leaders producing small solid carbide tools for difficult to machine materials.

+
Mikron Tool increases its presence in China
From now on the standard tools from Mikron Tool will be readily available from stock in China.
02 January 2018

A bit more than one year after moving to the Swiss Center Shanghai, Mikron Tool takes additional steps to increase the market presence in China. This requires an inventory composed of all standard products, a sales network with competent partners and organizing technical seminars. 

+

2017

Finishing in grinding surface quality
New milling cutter with integrated cooling now available from stock
25 October 2017

The CrazyMill Cool products have been developed for milling in small dimensions with highest performance and quality. Now a new “family member” has been added: a four teeth Finishing Milling Cutter with shank integrated cooling, available from stock in the diameter range of 1 to 8 mm and for milling depths of up to 5 x d. This milling cutter is suitable for machining all materials up to a hardness of 54 HRC. Nevertheless, this new tool has been developed focusing on stainless steels, titanium, heat resistant alloys based on nickel and chrome-cobalt-alloys. 

+
Deep holes in stainless steel
With 4 times more cooling capacity one shot drilling is possible
20 September 2017

CrazyDrill Cool SST-Inox is a solid carbide drill, in the diameter range from 1 to 6 mm, developed for the machining of stainless steels, heat resistant alloys (nickel based) and chrome-cobalt alloys. After the 2016 launch of the short versions of 6 x d and 10 x d, the program includes now drilling depths of 15 x d and 20 x d. Starting spring 2018 all standard sizes will be available from stock from all of their delivery centers.

+
New products at the EMO: drill deeper, mill faster
New Geometries and cooling systems guarantee process reliable machining
19 July 2017

The Swiss cutting tool manufacturer Mikron Tool presents at the EMO 2017 in Hanover drilling and milling tools in small dimensions to efficiently machine stainless and heat resistant materials. 

+
The Tool Book is here!
The Mikron Tool catalog with a large offer of standardized and customized tools is now available
30 June 2017

From the founding of the company with its first 6-page brochure it has taken nearly 20 years to todays 600-page catalogue. During this time Mikron Tool morphed from a supplier of just special cutting tools for transfer machines to a globally present tool manufacturer. Today the range of standardized tools includes more than 2600 individual items. These are now included in a "toolbook" together with many additional and useful information for the end user.

+
Live demo at the Mecspe 2017 in Parma
Innovative method to mill a bone plate made from Titanium
05 March 2017

At the booth of SCHUNK (Hall 2 booth F09) interested visitors can see live the milling of a Bone Plate in titanium. The partners who participate in this project present their specific products, which together guarantee a high stability of the entire machining process.

+

2016

Trade fairs 2016
Local - National - International
10 December 2016

To participate in exhibitions is not only worthwhile for large international shows. Also at national events, industry specialists like to meet and update themselves on new developments. Even more so, because these exhibitions feature more and more the participation of global companies. Point in case how to stay internationally and locally up to date in chip removal technology are the Prodex in Basle (Switzerland) and the Metalmadrid (Spain).

+
Mikron Tool at the IMTS in Chicago
Big interest for the new Tools for stainless steel materials
29 November 2016

The people in charge at Mikron Tool were satisfied indeed after participating at the IMTS in Chicago from 12 to 17 of September 2016. Lots of traffic at the booth and great interest in the products, this is how the week can be quickly summed up.

+
AMB Stuttgart: five happy winners
Participate also you the next time! Who visits Mikron Tool at the exhibition, wins in any case!
28 November 2016

The Mikron Tool booth was very busy at the AMB in Stuttgart ( from the 13th to 17th September 2016). And this not only because there were interesting prizes to be won. These were only the glazing on the cake of the topic which was predominant at the booth Z320: namely the precise, fast and process safe drilling und milling of stainless steels, heat resistant and CrCo alloys.

+
Expanding in China
The Mikron Tool sales team in Shanghai guarantees a good customer service for China.
31 May 2016

China is for Mikron Tool an interesting market, where in future we want to work directly and more closely with our customers and where we intend to intensify the introduction of our products on the Chinese market.
This will be done by our team in Shanghai together with a distribution network with partners which are going to assure a regional presence in the years to come.

+
Mecspe 2016
A firm appointment in the yearly planning
14 April 2016

Mikron Tool participates in Parma with its own booth and an attractive competition for the visitors plus presents itself a technological partner of the University of Parma.

+
TOOL FINDER
 
QUICK FINDER