MiquDrill 200 Coated
Diameter range
0.3 mm (.0118ˮ) to 1.5 mm (.0591”)
Drilling depth
1.4 x d - 2.4 x d
Coating
Coated
Cooling
External Cooling
MiquDrill 200, suitable for the finishing of short holes or preparation of deep holes. Available in diameters of 0.1 mm to 1.5 mm (.0039ˮ to.0591ˮ) (drill Ø 0.1 mm (.0039ˮ) to 0.29 mm (.0114”) uncoated, from drill Ø 0.3 mm (.0118ˮ) also coated), with usable lengths between 1.4 x d and
2.4 x d (depending on the diameter).
Solid Carbide
Tip angle 120°
Teeth number
External Cooling
Coating eXedur RIP
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;