CrazyDrill Non-FerrousType NN, 5 x d
CrazyDrill Non-FerrousType NK, 8 x d
CrazyDrill Non-FerrousType NN, 8 x d
CrazyDrill Non-FerrousType NK, 12 x d
CrazyDrill Non-FerrousType NN, 12 x d
CrazyDrill Non-Ferrous Type NN, 5 x d
Diameter range
2.0 mm (.079") - 6.35 mm (.250"), fractional inches available
Drilling depth
5 x d
Coating
Coated
Cooling
External cooling
CrazyDrill Non-Ferrous is available in diameters from 0.2 mm to 2.0 mm (.008" to .079"), including fractional inch sizes. This high-performance micro drill is designed for reliable, precise drilling in non-ferrous metals at depths of up to 12 × d.
The range includes two versions:
- CrazyDrill Non-Ferrous type NN – for applications with external coolant supply
- CrazyDrill Non-Ferrous type NK – for applications with through-tool cooling
For drilling with external cooling, CrazyDrill Non-Ferrous type NN is also available in a 5 × d version, covering diameters from 2.0 mm to 6.35 mm (.079" to .250"), including fractional inch sizes.
Solid Carbide
Drilling depth 5xd
Tip angle 130°
Teeth number
External Cooling
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;